An excellent tool for use in both the paint shop and the bodyshop. Can be used for quick hardening of filler, spray filler and paint. For application and removal of trim foil, plastic and trim mouldings etc. Can also be used for glazing.
The hand-held heater is intended for use on small patches. For example, drying small areas of filler, spray filler and for retouching. In retouching work, repairs dry very quickly, approximately 2 min. When the patch has cooled down, it can be polished at once. Feather edges of sprayed clear varnish can be dried off just as quickly, on the A-pillar for example, and can be polished immediately after cooling. The heater can be used in any application, where quick heating is required.
IRT 010 - Handheld infrared dryer
IRT 010
Download Files
Problems viewing our files?
Technical Specifications
Short-wavelength infra-red heater. Supplied with 2 m (6.5 ft) cable.
230 V, 1 kW, 4 A
110 V, 1 kW, 9 A
Energy use for 5 minutes use is only 0.08 kWh.
Packaging
The hand heater is packed in a cardboard box.
Measurements: 170 x 300 x 515 mm (6.7" x 11.8" x 20.3" )
Weight 1.8 kg (4 lb)
If you experience problems opening or viewing our files, Download the latest version of
Watch Video
